If you need to image 12x18 full bleed, bizhub C6501 and higher models plus many other machines can throughput 13x19 to give you just that. If I'm right, it can print on up to 300gsm paper (by specifications) so it should work with 350-400gsm paper. As I have talked with Minolta's service-guy, who said that these machines are whole new architecture and are really good. That is why all copier/printer manufacturers implemented having a 0.2-0.25 inch void around the edges. I currently use Xerox DC2240, but next week this model, C452, arrives. a page bounce +/- 1mm is not uncommon hopefully less but it is moving, may be a hairline or two if you lucky but it does, so imaging edge to edge will result in toner droppings in transfer are and everywhere after that, then every other page after will pick up all sh^& left after previous - use your imagination about what will happen. #2 As we all know, digital printing is not precise science, not in the real life anyway, i.e. #1 Reason - as imaged to the leading edge page would go trough the fuser, Toner while being fused (melted on to the paper's surface) momentarily become goovy/sticky stuff and as it reaches full temperature and cools down it comes out the way you see it, now, at that point if you have toner right on the edge it will stick to the upper fuser roller (teflon-shmeflon, does not matter what it coated with) and will wrap around of it, yes, not a single page will come out. Hi Jason, no it would not be possible to do just as it would be impossible to do on any other toner based printer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |